Model: Marmitek, Switch module without plug
  • Switch module without plug
  • Ideal for use in small spaces
Flying lead connection block with switch function. This module has the same technical specifications as the AM12 plug-in module, but the AM12W is equipped with flying leads. The module can be installed directly into lighting fixtures. Only for professional use!

Order # MA-HX-AM12W
» details

Home Automation

Model: Marmitek, Shutter switch Mounting
  • Switch
  • Remote and local control Up, Down and settings in between
Wall mounted switch for controlling motorised (230V) blinds and shutters. Intelligent switch with memory for window measurements and current position. Can be controlled with Marmitek X-10 through the existing house wiring or by hand. Can be put in any position with a Marmitek X-10 remote control. Shutter fully open/closed with one push of the button.

Order # MA-HXU-SW10G
» details
Model: Marmitek, Lamp Module Mounting
  • Makes your X-10 System invisible
  • Dimmer
  • Remote and local control On, Off and Dim
  • Memory function for last dimmer setting
  • Softstart and softdim
  • Transforms a momentary action switch into an X-10 controllable switch.
  • Can also transmit X-10 commands (two-way)
The LWM1 is a MicroModule with built-in dimmer that can be installed behind existing switches or wall outlets. The LWM1 can be controlled with X-10 signals via the mains or a momentary switch connected to the LWM1. The LWM1 has a memory setting for the last dimmer setting and uses SoftStart and SoftDim. The dimmer setting of the LWM1 is transmitted via the mains to other LWM1, LD11 or LW11 modules (only when set to the same address).

Order # MA-HXU-LWM1
» details
Model: Marmitek, Lamp Module Mounting
  • Makes your X-10 System invisible
  • Dimmer (60W - 250W)
  • Remote and local control On, Off and Dim
  • Memory function for last dimmersetting
  • Softstart and softdim
The LW12 is a MicroModule with built-in dimmer that can be installed behind existing switches or wall outlets. The LW12 can be controlled with X-10 signals via the mains or a momentary switch connected to the LW12. The LW12 has a memory setting for the last dimmer setting and uses SoftStart and SoftDim. The LW12 is the only X10 module that doesn't uses a zero wire. This means it can replace a switch without having to use any extra wiring.

Order # MA-HXU-LW12
» details
Model: Marmitek, Lamp Module Mounting
  • Dimmer
  • Remote and local control On, Off and Dim
  • Memory function for last dimmer setting
  • Softstart and softdim
Wall mounted dimmer for switching and dimming lights from 60W up to 500W. Can be used with incandescent lights with transformer. Provided with a soft start, soft dim and a memory for the last dim level. Can be controlled from 0% to the required dim level. Can be combined with (design) pulse switches. Can be controlled with Marmitek X-10 through the existing house wiring or by hand. Comes with a single trimplate. Compatible with Jung CD500 alpine white switch material.

Order # MA-HXU-LW11
» details
Model: Marmitek, Wall Mounted Switch
  • Makes your X-10 system invisible
  • Switch
  • Remote and local control On and Off
  • Transforms your existing switch into a X-10 controllable switch
  • Can also transmit X-10 commands (two-way)
The AWM2 MicroModule is an extremely small Marmitek X-10 transmitter for two addresses with built-in appliance module. The AWM2 connects up to two momentary or maintained switches by wire leads. External switch 1 controls the relay and transmits ON/OFF X-10 command for the configured address. Switch 2 only transmits an ON/OFF command for the configured address plus one. MicroModules use two-way X-10 communication. Marmitek MicroModules are designed to fit in the rear of European junction boxes, behind any installed switch or outlet.

Order # MA-HXU-AWM2
» details
Model: Marmitek, Wall Mounted Switch
  • Makes your X-10 system invisible
  • Switch
  • Remote and local control On and Off
  • Transforms your existing switch into a X-10 controllable switch
The AW12 MicroModule is an extremely small Marmitek X-10 appliance module which can be fitted behind any installed switch or outlet. The lights and appliances connected to the AW12 can be controlled by the Marmitek X-10 system. You will be able to use your switch in the normal way. The AW12 uses one-way X-10 communication.

Order # MA-HXU-AW12
» details
Model: Marmitek, Wall Mounted Switch
  • Switch
  • Remote and local control On and Off
Wall mounted switch for switching lights and appliances up to 2200W. Can be controlled with Marmitek X-10 through the existing house wiring or by hand. Comes with a single trimplate. Compatible with Jung CD500 alpine white switch material. Can be combined with (design) pulse switches.

Order # MA-HXU-AW10
» details
Model: Marmitek, Universal X-10 receiver
  • Transforms a Marmitek X-10 signal into a switch contact
  • Control your own low-voltage applications
  • Remote switching of your equipment
Universal switch module. Switches 24V DC with power up to 5A. Built-in buzzer can be switched off. Can be installed for pulse or continuous contact. Controllable from a distance with the Marmitek X-10 commands On/Off. Controllable by hand with pushbuttons on the module itself.

Order # MA-HX-UM7206E
» details
Model: Marmitek, Lampmodule for Version
  • Placed between the lamp and the socket
  • Remote control On and Off
  • Also suitable for low-energy light bulbs.
A Bayonet or screw-in Lamp Module. You can put this Lamp Module directly into the lamp socket. Can also be used with low-energy lamps. It is not possible to dim with this Lamp Module.

Order # MA-HX-LM15ES
» details
Model: Marmitek, Lamp Modules without Plug
  • Dimmer modules without plug
  • Ideal for use in small spaces
Flying lead connection block with dim function. This module has the same technical specifications as the LM12 lamp module, but the LM12W is equipped with flying leads. The module can be installed directly into lighting fixtures. Only for professional use!

Order # MA-HX-LM12W
» details
Model: Marmitek, Lamp Module Plug-in
  • Wall module
  • Remote control On, Off and Dim
  • Only suitable for normal light bulbs
Plug-in module for switching and dimming lights up to 300W. Controllable from a distance with Marmitek X-10 signal through the existing house wiring (On/Off/dim). The LM12 is suitable for Ohms loads (standard light bulbs).

Order # MA-HX-LM12G
» details
Model: Marmitek, Lampenmodul DIN
  • Dimmer
  • Fernbedient ein-/aus und dämpfen
  • Von Hand mit Pulsschalter zu bedienen
  • Speicherstand für letzte Dimmereinstellung
  • Softstart en Softdimmer
Dimmer zur Installation auf einer DIN-Schiene. Schaltet und dimmt Beleuchtungen bis 700 W. Geeignet für Beleuchtung auf 230V und für Niedervoltbeleuchtung mit Trafo, einschliesslich Halogenbeleuchtung. Kann mit Befehlen eines X-10 Senders über das Lichtnetz und mit einem oder mehreren Pulsgebern fernbedient werden. Kann in Verbindung mit ‚Design’-Schaltmaterial verwendet werden. Ausgestattet mit Soft-Start und Soft-Dimm, sowie Speicher für den letzten Dimmstand. Kann von 0% auf das gewünschte Dimmniveau geregelt werden.

Order # MA-HX-LD11
» details
Model: Marmitek, Switch Module
  • Wall module
  • Remote control On and Off
  • For lighting (also halogen) and appliances
  • NEW: From now on, Marmitek models are suitable for low energy lamps and sirenes
Plug-in module for switching 230V appliances, halogen and fluorescent lighting on or off. Switches loads up to 3600W. Controllable from a distance with Marmitek X-10 through the existing house wiring (On/Off).

Order # MA-HX-AM12G
» details
Model: Marmitek, Module Device DIN
  • Switch
  • Remote control On and Off
  • Local control with (momentary action) switch.
Switch for installation on DIN rail. Switches load up to 3600W. Can be controlled remotely with Marmitek X-10 commands through the existing house wiring and with a pulse switch or a toggle switch. Status indication with LED.

Order # MA-HX-AD10
» details
Model: Marmitek, Lamp Module DIN
  • Dimmer
  • Remote control On, Off and Dim
  • Local control with momentary action switch.
  • Memory function for last dimmer setting
  • Softstart and softdim
Dimmer for installation on DIN rail. Switches and dims light circuits up to 700W. Can be used for lights up to 230V and for halogen lights at low voltage. Can be controlled remotely with Marmitek X-10 commands through the existing house wiring and with one or more pulse switches. Can be used in combination with “design” switch material. Provided with a soft start, soft dim and a memory for the last dim level. Can be controlled from 0% to the required dim level.

Order # MA-HX-AD10
» details